Freezing The Image; Operating In A High Altitude Environment; Adjusting The Sound - ViewSonic PJD5111 User Manual

Freezing the image

Press FREEZE on the remote control to freeze the
image. The word 'FREEZE' will display in the upper
left corner of the screen. To release the function, press
any key on the projector or remote control.
Even if an image is frozen on the screen, the pictures
are running on the video or other device. If the
connected devices have active audio output, you will
still hear the audio even though the image is frozen on
screen.

Operating in a high altitude environment

We recommend you use the High Altitude Mode when your environment is between 1500
m–3000 m above sea level, and temperature is between 0°C–35°C.
CAUTION
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and temperature
is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on under
such a condition.
To activate the High Altitude Mode:
1. Press MENU/EXIT and then press
the SYSTEM SETUP: Advanced menu is
highlighted.
2. Press
press
message displays.
3. Highlight Yes and press MODE/ENTER.
Operation under "High Altitude Mode" may cause a higher decibel operating noise level
because of increased fan speed necessary to improve overall system cooling and
performance.
If you use this projector under other extreme conditions excluding the above, it may display
auto shut-down symptoms, which is designed to protect your projector from over-heating.
In cases like this, you should switch to High Altitude Mode to solve these symptoms.
However, this is not to state that this projector can operate under any and all harsh or
extreme conditions.

Adjusting the sound

The sound adjustments made as below will have an effect on the projector speaker. Be sure
you have made a correct connection to the projector audio input. See
13 for how the audio input is connected.
Muting the sound
To temporarily turn off the sound:
1. Press MENU/EXIT and then press
menu is highlighted.
2. Press
page displays.
3. Highlight Mute and press
32 Operation
to highlight High Altitude Mode and
/ to select On. A confirmation
to highlight Audio Settings and press MODE/ENTER. The Audio Settings
/
/ until
/ until the SYSTEM SETUP: Advanced
to select On.
Notice
We recommend you use the High Altitude
mode by selecting it whenever your
environment is higher than 1500 m.
Do you want to turn High Altitude Mode
ON?
Yes No
"Connection" on page