Powering On/Off The Projector; Powering On The Projector - ViewSonic PJ406D User Manual

Turn on the projector

fi rst and then the signal
sources.
ViewSonic PJ406D

Powering On/Off the Projector

Powering On the Projector

1. Remove the lens cap. 
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will turn Orange.
3. Turn on the lamp by pressing "Power/Standby" button on
the control panel. 
The startup screen will display for 10 seconds and the Power
LED will turn green.
4. Turn on your source (computer, notebook, video player,
etc.). The projector will detect your source automatically.
If you connect multiple sources at the same time, use the

"Source" button on the control panel or remote control to
switch.
LAMP
2
POWER/
STANDBY
Lens Cap
Power/Standby
1
11