ViewSonic PJD5152 User Manual page 43

Function
Language
Projector
Position
Auto Power
Off
Blank Timer
Panel Key
Lock
Timer
Controller
Splash
Screen
Message
Quick
Cooling
High Altitude
Mode
DCR
40 Operation
Sets the language for the On-Screen Display (OSD) menus. See
"Using the menus" on page 21
The projector can be installed on a ceiling or behind a screen, or
with one or more mirrors. See
for details.
Allows the projector to turn off automatically if no input signal
is detected after a set period of time. See
Off" on page 44 for details.
Sets the image blank time when the Blank feature is activated,
once elapsed the image will return to the screen. See
image" on page 33 for details.
Disables or enables all panel key functions except
on the projector and keys on the remote control. See
control keys" on page 33
Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 12 hours.
Allows you to select which logo screen will be displayed during
projector start-up. Three options are available: ViewSonic logo,
Black screen, or Blue screen.
Selecting On displays the current information on the screen
when the projector is detecting or searching for a signal.
Selecting On enables the function and the projector cooling time
will be shortened to a few seconds.
If you attempt to restart the projector right after the quick
cooling process, it may not be turned on successfully and
will rerun its cooling fans.
A mode for operation in high altitude areas. See
high altitude environment" on page 34
Enables or disables the DCR (Dynamic Contrast Ratio) function.
Selecting On enables the function and the projector will
automatically switch the lamp mode between normal and
economic modes according to the input image detected.
This function is only available when a PC source is in use.
After enabling DCR, frequent lamp mode switching may
shorten lamp life and noise level will vary during operation.
Description
for details.
"Choosing a location" on page 11
"Setting Auto Power
for details.
for details.
"Hiding the
I
I
POWER
"Locking
"Operating in a