Connecting Video Source Devices - ViewSonic PJD5152 User Manual

Show your big ideas with incredible short-throw distance
Hide thumbs Also See for PJD5152:
Table of Contents

Advertisement

Connecting Video source devices

You can connect your projector to various Video source devices that provide any one of the
following output sockets:
Component Video
S-Video
Video (composite)
You need only connect the projector to a Video source device using just one of the above
connecting methods, however each provides a different level of video quality. The method
you choose will most likely depend upon the availability of matching terminals on both the
projector and the Video source device as described below:
Best video quality
The best available video connection method is Component Video (not to be confused with
composite Video). Digital TV tuner and DVD players output Component Video natively, so
if available on your devices, this should be your connection method of choice in preference
to (composite) Video.
See
"Connecting a Component Video source device" on page 16
projector to a component video device.
Better video quality
The S-Video method provides a better quality analog video than standard composite Video.
If you have both composite Video and S-Video output terminals on your Video source
device, you should elect to use the S-Video option.
See
"Connecting an S-Video source device" on page 17
an S-Video device.
Least video quality
Composite Video is an analog video and will result in a perfectly acceptable, but less than
optimal result from your projector, being the least video quality of the available methods
described here.
See
"Connecting a composite Video source device" on page 18
projector to a composite Video device.
Connecting audio
The projector has one built-in mono speaker which is designed to provide basic audio
functionality accompanying data presentations for business purposes only. They are not
designed for, nor intended for stereo audio reproduction use as might be expected in home
theater or home cinema applications. Any stereo audio input (if provided), is mixed into a
common mono audio output through the projector speaker.
If you wish, you can make use of the projector (mixed mono) speaker in your presentations,
and also connect separate amplified speakers to the Audio Out socket of the projector. The
audio output is a mixed mono signal and controlled by the projector Volume and Mute
settings.
If you have a separate sound system, you will most likely want to connect the audio output
of your Video source device to that sound system, instead of to the mono audio projector.
for how to connect the
for how to connect the projector to
for how to connect the
Connection
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pjd5352Pjd5351 - dlp projectorVs13307Vs13147

Table of Contents