Remote Control - ViewSonic N3246w User Manual

Remote Control

POWER:
Press to turn on/off the TV. The
TV is never completely powered
off unless it is physically
unplugged.
VIDEO
Press this key you could select
AV1, AV2, S-VIDEO, HDTV and
HDMI.
SCART
Press this key you could select
SCART 1，SCART2-AV，and
SCART 2-S.
0~9 DIGIT BUTTONS
To select a TV channel.
SUBPAGE
Teletext Sub-page function.
Source
Select your input source: press
repeatedly to select TV, PC,
SCART, S-VIDEO or HDMI
mode, according to where you
connected your external source.
SOUND
To select Mono/ Stereo/Dual from
TV RF input.
DTV MENU
Press this key to display DTV
menu.
Zoom +,-.
Press these key to select desired
picture format.
(4:3, CINERAMA,16:9)
VOL
Press + or – (or MENU
button) to increase or decrease
the volume.
MENU
Press this key to display main
menu.
Teletext function and buttons will be described on next page.
ViewSonic
< > button
Use this button to confirm
selection or adjust the
desired parameter;
otherwise, to increase
/decrease the volume.
button
or
When in menu mode, use
this button to select to the
up/down; otherwise, to
change TV channels.
15
DISPLAY
Press this key to display:
(1) the channel number when
watching a TV program.
(2) the input source when
watching an AV program.
MUTE
Temporarily interrupt the sound
or restore it.
PC
Display PC mode
TV
Display TV mode
PRE-CH
To display the previously
selected TV channel.
PIP
Press this key to display
PIP/POP screen.
SLEEP
With this key you can set a time
period after which the TV
should switch itself to standby.
Press the key repeatedly to
select the number of minutes.
The counter runs from 0, 30, 60,
90,120 minutes. The timer
begins to count down from the
number of minutes selected
after the display has
disappeared.
CH
Press or (or MENU ▲/▼
button) buttons to scroll through
the channels.
EXIT
Press this key to exit main
menu.
OK
Press this KEY to validate your
selected.
N3246w/N3746w