Table of Contents
Advertisement
Available languages
Available languages
•
This appliance complies with the E.E.C.
Directives.
REAR SPACERS
You can find the two spacers in the bag with
documentation.
1. Release the screw.
2. Engage the spacer below the screw.
3. Turn the spacer to the right position.
4. Tighten again the screws.
4
CONTROL PANEL
1
2
Alarm light
1
Power indicator light
2
FastFreeze indicator
3
FastFreeze / Alarm reset button
4
Temperature regulator
5
SWITCHING ON
1. Insert the plug into the wall socket.
2. Turn the temperature regulator clockwise to a
medium setting.
Power indicator and alarm lights will illuminate.
SWITCHING OFF
To turn off the appliance, turn the temperature
regulator to
position.
The power indicator light remains
switched on until the appliance is
disconnected from the power socket.
2
1
3
3 4
5
DOOR REVERSIBILITY
Please refer to the separate document with
instructions on installation and door reversal.
CAUTION! At every stage of reversing
the door protect the floor from
scratching with a durable material.
TEMPERATURE REGULATION
The temperature is regulated automatically.
However, you can set a temperature inside the
appliance yourself.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:
•
room temperature,
•
frequency of opening the door,
•
quantity of food stored,
•
appliance location.
A medium setting is generally the most suitable
one.
To operate the appliance:
1. Turn the temperature regulator clockwise to
obtain a lower temperature inside the
appliance.
2. Turn the temperature regulator
counterclockwise to obtain a higher
temperature inside the appliance.
FASTFREEZE FUNCTION
The FastFreeze function is used to perform pre-
freezing and fast freezing in sequence in the freezer
compartment. This function accelerates the freezing
of fresh food and, at the same time, protects food
products already stored in the freezer compartment
from undesirable warming.
7
Advertisement
Table of Contents
