Troubleshooting - Zanussi ZUAN28FW User Manual

that break away before defrosting is complete.
Use the supplied ice scraper for this purpose.
5. Insert the plastic scraper in the appropriate
seating at the bottom centre, placing a basin
underneath to collect the defrost water.
6. Dry the valve and slot in the rear wall:
a. Remove the drawer.
b. Pull out the valve from the slot in the rear
wall.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem
The appliance does not oper-
ate.
c. Leave the valve to dry at room temperature.
d. Dry the slot in the rear wall.
e. Make sure the valve is completely dry. Pull
7. When defrosting is complete, dry the interior
thoroughly. Keep the ice scraper for the future
use.
8. Switch on the appliance and close the door.
9. Set the temperature regulator to obtain the
maximum coldness and run the appliance for at
least 3 hours using this setting.
Only after this time put the food back into the
freezer compartment.
PERIOD OF NON-OPERATION
When the appliance is not in use for long period,
take the following precautions:
1. Disconnect the appliance from electricity
supply.
2. Remove all food.
3. Defrost the appliance.
4. Clean the appliance and all accessories.
5. Leave the door open to prevent unpleasant
smells.
Possible cause
The appliance is switched off.
The mains plug is not connec-
ted to the mains socket cor-
rectly.
the valve into the slot.
Solution
Switch on the appliance.
Connect the mains plug to the
mains socket correctly.
11