Searching Recorded Video - Carrier Aritech TruVision DVR 17 Operator's Manual

To instantly replay recorded video:
1. In live view, left click the mouse on the desired
camera image. The live view toolbar appears.
Click the Instant Playback
Playback starts immediately. The playback scroll
bar appears under the selected camera.
2. Click Pause on the toolbar to pause
playback.
Click anywhere on the playback bar to start play
back from that point.
Playback mode
There are two types of playback, Normal and Event.
Normal playback
In normal playback you will see all the recorded
footage, continuous and event, for the selected
camera(s). Playback starts at the first recording time
of that selected day. Several cameras can be
selected for multiscreen display in normal playback
mode.
To do a normal playback:
1. In playback mode, click
2. Select the desired camera. More than one
camera can be selected.
3. Hover the mouse cursor on the video tile to
display the audio and video control bar. See
item 11 in the Playback figure on page 3 for a
description of the buttons available.
4. Click the icon for the desired function to carry
out.
Note: Event detection is not available in normal
playback.
Event playback
In event playback you can selectively play back the
parts of a recording with motion, cross line or
intrusion detection events and skip over video that
does not have such events. Event playback mode
analyses the video for VCA, smart events and motion
events and then marks them.
Only one camera can be selected in event playback
mode.
Administrator only: To be able to play back VCA,
smart events and motion events you must ensure
that the function Save Camera VCA Data
enabled. This function is only available in OSD
mode. Make sure that you have enabled
in the camera. See the recorder's user manual for
more information.
4
button.
Normal playback.
is
Dual-VCA
To play back an event:
Note: The Administrator must first have enabled
Save Camera VCA Data.
Record > Advanced
VCA Data has been enabled.
1. In playback mode, click
2. Select the desired camera.
3. Hover the mouse cursor on the video tile to
display the audio and video control bar. See
item 11 in the Playback figure on page 3 for a
description of the buttons available.
4. Click the event detection icon
desired event rule for motion, cross line, or
intrusion detection. Then draw where you want
to mark the detection to be done on screen.
— or —
Click Clear to delete previous detection rules.
5. Click the Search
search and play back video with the matched
events.

Searching recorded video

To enter the Search menu in OSD mode, click the
Search icon in the top toolbar. The Search
window has five submenus that allow you to carry
out different searches by theme.
Search type
1. Video
2. Picture
3. Event
4. Person
5. Vehicle
TruVision DVR 17 and NVR 12 Recorder Operator Guide
Go to Configuration
and confirm that Save Camera
Event playback.
. Select the
icon in the control toolbar to
Description
Search all video by time and date of
recording and camera. You can also
search for bookmarks and locked
videos. Locked videos cannot be
overwritten.
Search all video snapshots and
related video clips by time and date
of recording and camera.
Search all video by time and date of
recording and camera. You can
search by the event types shown in
the drop-down list.
Search all video and snapshots by
time and date of recording and
camera and specifically for events
caused by people.
Search all video and snapshots by
time and date of recording and
camera and specifically for events
caused by vehicles.
>