Turning Device On Or Off; Turn Device On Or Off; Set Device To Silent Mode; Unlocking The Screen - ViewSonic ViewPad 7e User Manual

1.6 Turning Device On or Off

Turn device on or off

After installing the memory card and charging the battery, the device is ready to be turned
on.
Turn on your device
Press and hold the Power button
turns on.
Turn off your device
1. Press and hold the Power button
2. Tap Power off, and then select OK to confirm.
To set your device to Sleep mode
To set the device to sleep mode, press the Power button
To turn the display on, press the Power button

Set device to Silent mode

1. Press and hold the Power button
2. Tap Silent mode.
Or, on a locked screen, slide
To undo silent mode, slide
NOTE
To press Power button
reset the device.

1.7 Unlocking the Screen

Lock the screen to prevent it from accidentally being touched. By default, the screen locks
after being idle for a period of time. You can set the length of screen timeout until the
screen locks.

To Unlock the screen

1. Press the Power button
2. Drag the icon to the right to unlock the screen.
on the left top of your device until the device display
until a pop-up window appears.
again.
until a pop-up window appears.
to the left.
to the left.
and Home button
to turn on the display from sleep mode.
5
. This will turn the display off.
at the same time for 3 seconds will