Circuit Specialists CSI-PREMIER-110W Operation Instruction

Table of Contents

Download this manual

Statement:Thecompanyreservestherighttoimprove&upgradeproducts,

product specifications and design are subject to change without notice.

MadeinChina

939D+-3 110W

ESD Safe & Temperature-Adjustable

Soldering Station

O P E R AT I O N

INSTRUCTION

English

Thank you for purchasing this product. Please read the manual

carefullybeforeoperatingandkeepthismanualforfuturereference.

04.07.03.467

Table of Contents

Need help?

Do you have a question about the CSI-PREMIER-110W and is the answer not in the manual?

Page 1 939D+-3 110W 04.07.03.467 Soldering Station ESD Safe & Temperature-Adjustable Statement:Thecompanyreservestherighttoimprove&upgradeproducts, product specifications and design are subject to change without notice. O P E R AT I O N INSTRUCTION English Thank you for purchasing this product. Please read the manual MadeinChina carefullybeforeoperatingandkeepthismanualforfuturereference.
Page 2 INSTRUCTIONS III. INSTRUCTIONS 1. Depending on the users’ preferences, it is optional to install the soldering iron holder either L168xW128xH185mm±5mm Mainunitdimensions at the side of the station or on top of the station. Install the holder as per the diagrams below: Temperaturerange 200℃~480℃/392℉~896℉...
Page 3 Digital Temperature Calibration Indicator for program tracking temp. at high speed and making temp. compensation. Temperature discrepancies may occur due to the change in the environment's temperature or due to the CAUTION: Upon the first use of the soldering iron, set the temperature to 250°C/482°F. When the iron is replacement of the heating element and other components.
Page 4 Tipstyle（specificationsandsizes） IV. MAINTENANCE & PRECAUTIONS 902SeriesTipOutDiamφ6.5mm 1. If a layer of oxidization forms on the surface of the soldering iron tip, a misconception can be created that the soldering tip cannot heat up properly to melt the solder and do the tinning. 902-B But the actual temperatures of both the heating element and soldering tip are high.