Advertisement
Quick Links
Models/Modelos/Modèles
505LF, 525LF-MPU
Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care and maintenance
information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave
Delta usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE TOUTES les instructions avant
de débuter;
• LIRE TOUS les avertissements ainsi que toutes
• Acheter le bon nécessaire de raccordement.
www.deltafaucet.com
77425
You may need/Usted puede necesitar/
Articles dont vous pouvez avoir besoin:
1/8"
(3.17mm)
SINGLE HANDLE LAVATORY
CENTERSET FAUCETS
LLAVES MONOCONTROL DE MONTURA
DE CENTRO PARA LAVAMANOS
ROBINETS À ENTRAXE COURT À
UNE POIGNÉE
1
T E FLO N
01/20/2023 Rev. E
Advertisement
Related Manuals for Delta 505LF Series
Summary of Contents for Delta 505LF Series
- Page 1 You may need/Usted puede necesitar/ Articles dont vous pouvez avoir besoin: T E FLO N 1/8" (3.17mm) For easy installation of your Delta faucet you will need: • To READ ALL the instructions completely before beginning. • To READ ALL warnings, care and maintenance information.
- Page 2 CONNECT TO WATER SUPPLIES. Position faucet (1) and gasket (2) on sink. Option: If sink is uneven, use silicone under the gasket. (HOOK-UPS NOT PROVIDED). Determine which type of connection you will be making. (1) Ball nose risers (3/8" O.D. copper tubing) with coupling nuts (2) or (3) 1/2"...
- Page 3 Step 3b Metal Pop-Up Installation Remove stopper (1) and flange (2). Apply silicone to underside of flange (1). Insert body Remove pivot nut (1). Install horizontal rod (2) and Step 3c (2) into sink. Screw flange (1) into body (2). stopper (3) as removable (4) or non-removable Screw nut (1) all the way down.
- Page 4 FLUSH SYSTEM/CHECK FOR LEAKS. Remove aerator (1) using supplied wrench (2) and move faucet handle (3) to the full on mixed position. Turn on hot and cold water supplies (4) and flush water lines for one minute. Important: This flushes away any debris that could cause damage to internal parts.
- Page 5 Setting The Handle Limit Stop (Optional) because it limits the amount of hot water in the mix; however, this handle limit stop This faucet includes an integrated handle limit stop that has two positions. Position 1, to the left, allows full handle motion (the full range between “all cold” to “all hot”). will not always prevent scalding because it does not compensate for incoming pressure or sudden water temperature changes.
-
Page 6: Maintenance
Maintenance If leak persists–SHUT OFF WATER SUPPLIES. If faucet exhibits very low flow: bonnet nut with a wrench could result Replace valve cartridge (3). When reinstalling parts, in water damage. A. Remove and clean Aerator (1) with supplied make sure bonnet nut (5) is tightened securely with wrench (2), or Note: Do not attempt to disassemble cartridge (3). - Page 7 77425 Rev. E...
- Page 8 What You Must Do To Obtain Warranty Service or Replacement Parts: A warranty claim may be made and replacement parts may be obtained by calling 1 800 345 DELTA (3358) or by contacting us by mail or online as follows (please include your model number and date of original purchase): ©...