Table of Contents
Advertisement
12.3 How to use: Pyrolysis
Clean the oven with Pyrolysis.
WARNING!
There is a risk of burns.
Turn off the oven and wait until
it is cold.
Step 1
Set the function:
Step 2
Turn the control knob (for the temperature) to set the cleaning mode.
Option
P1
P2
Step 3
- press to start the cleaning.
Step 4
After cleaning, turn the knob for the heating functions to the off position.
During the cleaning the oven lamp is off. The oven door stays locked. When the oven is cold, the door un‐
locks.
When the oven is at the set temperature, the door locks. Until the door unlocks the display shows: the bars of the
heat indicator,
. To stop cleaning before it is completed, turn the knob for the oven functions to the off posi‐
tion.
Turn off the oven and wait until it
is cold.
12.4 Cleaning reminder
The oven reminds you when to clean the
oven with: Pyrolysis.
Pyrolysis - flashes in the display for 10 sec
after each activation and deactivation of the
oven.
12.5 How to remove and install: Door
The oven door has three glass panels. You can remove the oven door and the internal glass
panels to clean them. Read the whole "Removing and installing door" instruction before you
remove the glass panels.
CAUTION!
Do not use the oven without the glass panels.
20
ENGLISH
Before the Pyrolysis:
Remove all accessories.
.
- flashes.
Cleaning mode
Light cleaning
Normal cleaning
When the cleaning ends:
Clean the cavity with a soft cloth.
CAUTION!
If there are other appliances installed in
the same cabinet, do not use them at the
same time as this function. It can cause
damage to the oven.
Clean the oven floor and the inner door
glass with warm water, a soft cloth and
Remove the residue from the bottom of
,
- press at the same time to turn off
the reminder.
a mild detergent.
Duration
1 h 30 min
2 h 30 min
the cavity.
Advertisement
Table of Contents
