Table of Contents
Advertisement
INSTALLATION
WARNING: Ensure all DC connections are tight. Loose connections
can cause overheating and pose a hazard. Only use high-quality
copper wire and keep the cable in a suitable length.
Choosing a Location
When choosing a location for the power inverter, keep in mind the following
recommendations:
• Make sure it has enough ventilation. Ideally, there should be at least 50cm of clear
space behind the exhaust vents to allow proper heat dissipation. Overheating can
reduce the inverter's output capacity.
• Protect it from dust, debris, water, and moisture.
• Do not install it in the same enclosure as the batteries.
<50cm
≥50cm
Advertisement
Table of Contents
