Safety And Warnings - Certa CTPSWAVINVA User Manual

SAFETY & WARNINGS
Before first use, read all safety warnings and instructions in this user guide. Retain this user
guide for future reference.
It is high recommended to have this product installed by a licenced electrician or auto-
electrician.
• Keep out of reach of children.
• Use the inverter in a dry, dust-free location. Ensure proper ventilation by not covering or
blocking ventilation openings. Install the inverter in a compartment with enough
clearance.
• The wiring used with the inverter must be correctly sized and in good condition to avoid
the risk of electric shock and fire.
• Avoid installing the inverter in compartments that contain batteries or flammable
materials or atmospheres as the components of the inverter can produce arcs or
sparks.
• This inverter incorporates standard AC short circuit protection. It is recommended to
use additional over-current circuit breaker protection or fusing. Consult a qualified
electrician if needed.
• When working on the inverter, remove metal objects, use insulated tools, wear rubber
gloves and rubber-soled shoes.
• If this product shows any signs of damage, cease use immediately and contact
help.Kogan.com for support.
• Do not operate the inverter near water, with wet hands or in areas with high humidity.
• This product does not contain user serviceable parts, do not attempt to open, modify or
disassemble.
• Check the DC input connections to ensure they are secure and correctly oriented to
positive and negative.
• Avoid dropping any metal tool on the battery posts as it can cause a violent short
circuit that can result in sparks, fire, explosion causing severe injuries.
• Install the inverter in a well-ventilated area and avoid blocking the front or rear air vents.
• Ensure the inverter receives adequate DC input power by using appropriately sized
cable.
• Mount the inverter horizontally if possible to prevent debris from falling in ventilation
holes.
• Do not operate the inverter near combustible gas, explosives or fire.
• Do not connect appliances that may feed power back into the inverter.