Functions/Programmes Selec - Smeg WNP96SLAAIN User Manual

You can reduce the time for your lightly
soiled laundry by pressing the Fast/Intens-
ive button in the programmes which come
with intense being selected. When you
press the button once, the LED will turn off
and you will reach the appropriate pro-
gramme duration for your normally soiled
clothes/laundry. When you press the same
button a second time, the fast LED will light
up, the time will decrease a little and it will
show the minimum programme duration,
which is suitable for your less soiled laun-
dry. The duration of programmes may
shorten by 50% when this function is selec-
ted. While the duration shortens, due to op-
timized washing steps, mobility and op-
timum water consumption of the high
mechanics, high washing performance is
achieved.
• Extra Rinse
This function enables the product to make
additional rinsing in addition to the one
already made after the main wash. Thus,
the risk for sensitive skins (babies, allergic
skins, etc.) to be effected by the minimal
detergent remnants on the laundry can be
reduced.
• Anti-Crease
This function makes the garments crease
less when being washed. Rotational move-
ments are decreased and spin speed is lim-
ited to prevent creasing. In addition, wash-
ing is done with a higher water level.
• Steam
This function helps to reduce the creases
of your cotton, synthetic and mixed clothes,
shorten the ironing time and remove the
dirt by softening.
* Under conditions where the steam func-
tion is applied at the end of the programme,
your laundry may be warmer at the end of
the washing. This is expected within the
programme working conditions.
When you activate the steam func-
tion, do not use liquid detergent if
there is no liquid container or liquid
detergent dosing feature. There is
the risk of staining of the clothes.
• Automatic Dosage
You can change your dosage and detergent
preferences with this auxiliary function but-
ton. For detailed information, see "Dosage
Selections, Cancellation or Use of Powder
Detergent"
6.8.2 Functions/Programmes Selected
by Pressing the Function Keys
for 3 Seconds
• Anti-Crease+
This function is selected when the relevant
Auxiliary function button is pressed and
held for 3 seconds and the programme fol-
low-up light for the relevant step turns on.
When the function is selected, the drum ro-
tates for up to 8 hours for preventing the
laundry from creasing at the end of the pro-
gramme. You can cancel the programme
and take your laundry out at any time dur-
ing the 8-hour duration. Press the function
selection key or the machine on/off key to
cancel the function. The programme follow-
up light will remain on until the function is
cancelled or the step is complete. If the
function is not cancelled, it will be active in
the subsequent washing cycles as well.
• Extra Water
This function can be selected by pressing
and holding the related auxiliary function
button for 3 seconds.
This function allows you to wash with
plenty of water and rinse your laundry in all
the programmes indicated as selectable in
the Programme and Consumption table.
Use this function for delicate laundry that
creases easily.
EN / 28