Campbell CM106B Quick Start Manual

Overview
The CM106B is a general purpose tripod that can be used for
mounting sensors, solar panels, antennas, and instrument en-
closures. It is constructed from galvanized steel, with individually
Benefits and Features
Support for meteorological sensors, hydrological sensors, sen-
sor mounts, solar panels, environmental enclosures
Portable instrument mount
Ease of assembly, while maintaining high performance standard
Technical Description
The CM106B includes lightning and grounding rods, grounding
cables, UV resistant cable ties, the 30338 mast extension kit, and
stakes for securing the tripod feet to the ground. An optional
guy kit is recommended for sites that may experience high wind
speeds. Instrument enclosures can be purchased with mounting
brackets that attach to either the mast or leg base.
Light, Adjustable, Rugged
adjusted legs that allow installation over uneven terrain. Height of
the mast is 2.1 m (7 ft), or 3 m (10 ft) with the mast extension.
Lightning and grounding rods, grounding cables, grounding ca-
ble clamps, ground stakes, and UV-resistant cable ties included
Enclosures can be mounted on tripod leg, as well as mast
Enclosures mount higher on the leg
The CM106B can be used for a variety of applications. For me-
teorological stations, sensors are mounted to the tripod using
mounting brackets appropriate for the model of sensor. For non-
meteorological applications, the tripod can be used to mount
instrument enclosures, solar panels, junction boxes, or antennas.
CM106B, CM106BK
7-to-10 ft Galvanized-Steel-Tubing Tripod and Tripod Kit
Galvanized tubing is light, strong,
and corrosion-resistant
A close up of the adjustable leg clamp.
questions & quotes: 435.227.9120
www.campbellsci.com/cm106b
COMPONENTS