Telesystem Yealink T54W Quick Reference Manual

Yealink T54W Phones
Quick Reference Guide
Available features may vary. Provided feature set is based on the original order and
the system administrator's requests for each deployment. Please contact your system
administrator or Telesystem directly to discuss any additions to the system.
Programmable Top Keys: two line keys plus up to 25 other
buttons may be programmed on the keys that line the right
and left side of the dynamic screen.
Soft keys:
four state-
based keys
that line the
bottom of the
screen. Press
the More key
to see
additional
options.
Volume
Navigational
Buttons
Toledo, Ohio
Message Waiting
Indicator (Voicemail)
Speaker
Dial Pad
| Philadelphia, Pennsylvania
Green Platform

Basic Call Handling

Make a call
Lift the handset then enter the phone number, extension, or code you wish to dial.
Press Send to initiate the call or wait for it to go through.
Answer a call
Lift the handset then begin speaking to the caller.
Alternately, the Line key, Answer soft key, Speaker button, or Headset button may
be pressed to answer an incoming call.
End a call
Hang up the handset or tap the End Call soft key.
Speaker
Press the speaker
Headset
Press the headset
attached).
Volume
Press the volume
audio mode while on a live call.
Headset
Mute
Mute
Press the mute button to mute your audio while on a call. Press again to
Messages
disengage.
Hold

Advanced Call Handling

Transfer
Hold
Redial
Press the hold button or Hold soft key to place an active call on hold.
To resume a held call, press one of the following:
• Resume soft key
•
button
• line key (blinking)
| 1.888.808.6111 | www.telesystem.us
button to use speaker audio mode.
button to use headset mode audio (must have a headset
buttons to adjust volume for your ringer when idle or
4.12.21