Telesystem Yealink T54W Quick Reference Manual

Yealink T54W Phones
Quick Reference Guide
Available features may vary. Provided feature set is based on the original order and
the system administrator's requests for each deployment. Please contact your system
administrator or Telesystem directly to discuss any additions to the system.
Programmable Top Keys: one line key plus up to 26 other
buttons may be programmed on the keys that line the right
and left side of the dynamic screen.
Soft keys: four
state-based
keys that line
the bottom of
the screen.
Press the More
key to see
additional
options.
Volume
Navigational
Buttons
Toledo, Ohio
Message Waiting
Indicator (Voicemail)
Speaker
Dial Pad
| Philadelphia, Pennsylvania |
Blue Platform
Basic Call Handling
Make a call
Lift the handset then enter the phone number, extension, or code you wish to dial.
Press Send to initiate the call or wait for it to go through.
Most deployments should be sure to dial 1 before an out of area phone number.
Answer a call
Lift the handset then begin speaking to the caller.
Alternately, the Answer soft key, Speaker button, or Headset button may be pressed
to answer an incoming call.
End a call
Hang up the handset or tap the End Call soft key.
Speaker
Press the speaker
Headset
Headset
Mute
Press the headset
attached).
Messages
Hold
Volume
Press the volume
Transfer audio mode while on a live call.
Redial
Mute
Press the mute button to mute your audio while on a call. Press again to
disengage.
1.888.808.6111 | www.telesystem.us
button to use speaker audio mode.
button to use headset mode audio (must have a headset
buttons to adjust volume for your ringer when idle or
4.12.21