Table of Contents
Advertisement
5.3 OVERLOAD CUT-OUT 2 × 230 V SOCKET-OUTLETS
IMPORTANT!
The generator is fitted with an overload cut-out.
This shuts down the sockets (3). You can restart the sockets (3) by pressing the overload cut-out (5).
IMPORTANT!
If this happens, reduce the electric power you are taking from the generator or remove any defective connected
appliances.
IMPORTANT!
Defective overload cut-outs must be replaced only by overload cut-outs of identical design and with the same
performance data. If repairs are necessary, please contact your customer service center.
5.4 SWITCHING OFF THE ENGINE
Before you switch off the generator, allow it to run briefly with no consumers so that it can „cool down"
Move the ON/OFF switch (10) to position „OFF" with the key.
Close the petrol cock
6. CLEANING, MAINTENANCE, STORAGE AND
ORDERING OF SPARE PARTS
Switch off the motor and pull the spark plug boot from the spark plug before doing any cleaning and
maintenance work on the equipment.
NOTICE!
Switch off the machine immediately and contact your service station:
In the event of unusual vibrations or noise
If the engine appears to be overloaded or misfires
6.1 CLEANING
Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the
equipment with a clean cloth or blow it with compressed air at low pressure.
We recommend that you clean the device immediately each time you have finished using it.
Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning agents or solvents;
these could attack the plastic parts of the equipment. Ensure that no water can seep into the device.
6.2 AIR FILTER
In this connection, please also read the service information.
Clean the air filter at regular intervals, and replace it if necessary.
Open both clips (Fig. 5/A) and remove the air filter cover (Fig. 5/B).
Remove the filter elements (Fig. 6/C)
Do not use abrasive cleaning agents or petrol to clean the elements.
GENERATOR
Operation | Cleaning, maintenance, storage and ordering of spare parts
11
EN
USER MANUAL
Advertisement
Table of Contents
