Milwaukee M18 BLSAG125XPD Operator's Manual

Milwaukee M18 BLSAG125XPD Operator's Manual

Brushless 125 mm (5") angle grinder with deadman paddle switch
Hide thumbs Also See for M18 BLSAG125XPD:

Advertisement

Quick Links

OPERATOR'S MANUAL
Cat. No.
M18 BLSAG125XPD
M18™ BRUSHLESS 125 MM (5") ANGLE GRINDER WITH
DEADMAN PADDLE SWITCH
WARNING
To reduce the risk of injury, user must read and understand operator's manual.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M18 BLSAG125XPD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Milwaukee M18 BLSAG125XPD

  • Page 1 OPERATOR'S MANUAL Cat. No. M18 BLSAG125XPD M18™ BRUSHLESS 125 MM (5") ANGLE GRINDER WITH DEADMAN PADDLE SWITCH WARNING To reduce the risk of injury, user must read and understand operator's manual.
  • Page 2: General Power Tool Safety Warnings

    GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury.
  • Page 3 • When battery pack is not in use, keep it away • The dimensions of the accessory mounting must from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, the power tool. Accessories that do not match the mounting hardware of the power tool will run out of that can make a connection from one terminal balance, vibrate excessively and may cause loss of...
  • Page 4 For example, if an abrasive wheel is snagged or • When using dual purpose wheels always use pinched by the workpiece, the edge of the wheel that the correct guard for the application being per- is entering into the pinch point can dig into the surface formed.
  • Page 5: Functional Description

    • Always operate with two hands. Always use common sense and be cautious • Cat. No........M18 BLSAG125XPD when using tools. It is not possible to anticipate Volts ............18V DC every situation that could result in a dangerous Battery Type ..........M18™...
  • Page 6 Installing/Removing the Type 1 Installing/Adjusting/Removing the Guard Clip-on Guard This tool is shipped with a guard. A guard must be used when using the tool as a grinder. The guard may When using a Type 1 wheel, always use the Type 1 be removed when using tool as a sander.
  • Page 7 Inspect the parts for remove dust and debris. Inspect the parts for damage. Replace needed. only damage. Replace needed. only MILWAUKEE mounting hardware designed for ® MILWAUKEE mounting hardware designed for ® your tool. your tool. 4. Place the on spindle, as shown.
  • Page 8: Operation

    Using Grinding Wheels OPERATION The guard typ e must match the To reduce the risk of injury, WARNING WARNING wheel type to provide maximum always wear proper protection for the operator if the wheel should protection marked comply with break. AS/NZS 1337.1.
  • Page 9: Troubleshooting

    (knot type vs. crimped wire of parts, or any other condition that may affect the type). tool operation. Return the tool, battery pack, and charger to a MILWAUKEE service facility for Using Sanding Discs ® repair. After six months to one year, depending on Hold tool at 5°...
  • Page 12 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...

Table of Contents