Table of Contents
Advertisement
U S I N G YO U R
A R O M A D I F F U S E R
Note:
•
If there is no water in the base, the diffuser
will not turn on and the ambient light will blink
red. Add water.
•
To avoid spills, place the diffuser on a stable,
level surface where it will not be overturned.
•
Avoid removing the cover while the diffuser
is running.
Mist Level
1.
Press
once. The diffuser will start
on the low mist level, and the ON light will
turn on.
2.
Press
again to use the high mist
level. The ON light will blink twice, then
remain on.
3.
Press
a third time to turn misting off.
The ON light will turn off.
Timer
•
Press
several times to cycle through
timer lengths (1, 3, and 6 hours) and to turn the
timer off.
•
The diffuser will turn off at the end of the timer.
•
The timer will only be used when mist is
turned on.
Memory Function
When the diffuser turns off, it will remember your
mist and light settings when turned back on.
Turning the Diffuser Off
Press and hold
the diffuser off.
6
for several seconds to turn
Light
1.
After turning on the diffuser, press
once to turn on the
ambient
light will automatically cycle through color
and brightness settings (see
page 7).
Note:
controls the ambient light, not the mist.
2.
Press
a second time to lock a color
on the
light. The first color will be
ambient
white at 50% brightness.
3.
Press
again to switch to the next color
and brightness setting. The color will be
locked. Pressing
color and brightness settings in the order
listed in
Light
Chart. After cycling through
all colors, pressing
ring off. Pressing
Automatic Color Cycle Mode.
4.
Press and hold
to turn the
off. The
light will remember your
ambient
last setting when turned back on, unless
the diffuser is unplugged.
light. The
Light
Chart,
repeatedly will cycle
will turn the light
again will turn on
ambient
light
Advertisement
Table of Contents
