Sunset Trading DLU-TLB-3660 Assembly Instructions

701 E Industrial Pk Dr
Manchester, NH 03109
sunsettrading.com
Turn the under side of the Table Top over
1
and place it on a clean and smooth surface
such as rug or carpet to avoid the Table Top from
being scratched .
01
Turn the assembled Table over carefully,pull the Table Top
4
to both two sides then lift up the Center Leaf from the
compartment and turn the Center Leaf to open to lie on apron.
Push the side Center Top at both end close to the
5
Table Leaf until it leaves no empty spaces.
Open the Table Hock under the
table before Center Leaf
is assembled and lock it.
Thank you for purchasing this quality
product! It has been engineered for easy
assembly yet constructed for durability.
Please take the time to read and follow
the instructions while assembling.
Fix the turned Leg to the corner of the apron with
2
the Flat Washer ,Spring Washer And Hex Nut
using the Spanner to tighten it.
Remove the plastic
cover from the
Pedestal and Footings.
02
Please Contact us if you are
Missing Parts or have any Questions
877-364-8464
info@sunsettrading.com
Repeat the same step for the other three Legs .
3
02
Apron
a b
c
d
01
ASSEMBLY INSTRUCTIONS
SKU: DLU-TLB-3660
List of Parts For 1 Set
01 Table Top 1
01
Table Leg
02
4
With Nail Leg
List of Hardware For 1 Set
Flat Washer
8
a
5
" x 22mm
16
Spring Washer
b 8
5
"
16
Hexagon Nut
8
c
5
" x 7mm
16
Spanner
d
1
12.8mm
IMPORTANT NOTES:
• Keep all hardware and small parts
out of reach of children.
• Remove all staples and packing
straps before you start to assemble.
• Do not discard main cartons and
wrapping material until assembly is
complete.
• Check to be sure you have all parts
and hardware.
• Place all wooden parts on a clean
soft surface to avoid parts from
being scratched.
• Do not tighten all screws / bolts until
completely assembled.
• Check tightness 3x's/year, with use
screws can become loose.
• Do not attempt to repair or modify
parts that are broken or defective.
Please contact us immediately.
• Enjoy your new furniture!
MADE IN MALAYSIA