Table of Contents
Advertisement
HMTB6855-3: 3SETS BLADES, 8x M10 Screw ,8xM10 nut
HMTB8365-3 : 4SETS BLADES,10x M10 Screw ,10xM10 nut
Connect the blade set and rear disc one by one with M10x45 screws and
M10 nuts . Next put the whole blade set to the shaft of the gear box . Tight
it with M10x45 and M10 nuts .
(Please make sure that the edges of tines forward to the front wheel).
4. Install Front Wheel ： Put one M8x45 screw to the inner hole of the
frame , inset the front wheel , and fix it with another M8x45 screw .
8
Advertisement
Table of Contents
