Hyundai HMTB52-1 Original Instructions Manual page 3

Check oil and fuel before start to use
That the machine shall always be used in accordance with these

manufacturer's instructions the instruction handbook
The engine shall be stopped when carrying out maintenance and

cleaning operations, when changing tools and when being transported
by means other than under its own power;
Some hazards can be met when working on slopes; work slowly by

holding firmly the tool. Do not transport the tool on slopes. The hazards
can rise when working on difficult soil (stony, hard, etc.). there is a risk
to hit some objects, sliding, lose control for the machine which will gives
damages. Always inspect the working area before working, and always
watch what you are doing.
The adjustable part of the protective device shall be adjusted to the

working depth of the tool so that only that part of the working tool that
cuts into the soil remains uncovered. This does not apply to motor hoes.
1) Training
a) Read the instructions carefully. Be familiar with the controls and the
proper use of the equipment;
b) Never allow children or people unfamiliar with these instructions to use
the machine. Local regulations can restrict the age of the operator;
c) Never work while people, especially children, or pets are nearby;
d) Keep in mind that the operator or user is responsible for accidents or
hazards occurring to other people or their property.
2) Preparation
a) While working, always wear substantial footwear and long trousers. Do
not operate the equipment when barefoot or wearing open sandals;
2