Electrolux EA2F6840CF User Manual page 22

Table of Contents

Advertisement

22
www.electrolux.com
• The door locks, the display shows
the indicator
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press the
cancel the delay start:
12.7 The AutoSense System
load detection
The programme duration in
the display is referred to a
medium/high load.
After touching the Inicio/Pausa
button, the AutoSense System starts the
laundry load detection:
1. The appliance detects the load in the
first 30 seconds. In the programmes
where Time Manager is available,
during this phase the two dots
separating hours from minutes are
blinking and the drum rotates shortly.
2. The programme duration could be
adjusted accordingly and could
increase or decrease. After further 30
seconds, the water filling starts.
About 20 minutes after the
programme start, the
programme duration could
be adjusted again depending
on the capacity of water
absorption of the fabrics.
The AutoSense detection is
carried out with complete
washing programmes only
and if the programme
duration has not been
reduced.
.
• Press
to set the
appliance to pause.
• Press
until the
display shows
'.
• Press
again to
start the programme
immediately.
12.8 Interrupting a programme
. To
and changing the options
You can change only some options
before they operate.
1. Press
The indicator flashes.
2. Change the options.
3. Press
The programme continues.
12.9 Cancelling a running
programme
1. Turn the programme knob to position
to cancel the programme and to
deactivate the appliance.
2. Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.
12.10 Opening the door when
the delay start operates
While a delay start operates, the
appliance door is locked and the
indicator
1. Press
2. Wait until the door lock indicator
goes off.
3. You can open the door.
4. Close the door and press the
again.
The delay start continues to operate.
The AutoSense System is
not available with all
programmes such as :Lana
\Lãs/Seda, Aclar./Enxag.,
Centrif. and programmes
with short cycles.
.
again.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
is on.
to pause the appliance.

Advertisement

Table of Contents
loading

Table of Contents