Configuring The Operating Language; Local Display; Operating Tool; Web Server - Endress+Hauser Micropilot FMR66B Operating Instructions Manual

Commissioning
46
9.4

Configuring the operating language

9.4.1

Local display

Setting the operating language
To set the operating language, the display first needs to be unlocked:
1. Press the  key for at least 2 s.
 A dialog box appears.
2. Unlock the display operation.
3. Select the Language parameter in the main menu.
4. Press the  key.
5. Select the desired language with the  or  key.
6. Press the  key.
Display operation locks automatically (except in the Safety mode wizard):
• after 1 min on the main page if no key has been pressed
• after 10 min within the operating menu if no key has been pressed
9.4.2

Operating tool

Set display language
System → Display → Language
Selection in Language parameter; Visibility depends on order options or device settings
9.4.3

Web server

1 Language setting
Micropilot FMR66B PROFINET with Ethernet-APL
1
A0048882
Endress+Hauser