Pinegreen Lighting CL-TP18RGB-EXT User Manual

USER MANUAL CL-TP18RGB-EXT | 18' RGB LED TAPE LIGHT EXTENSION

CARE FOR YOUR PRODUCT:

Your product will last for many years with minimum care. Therefore, it is essential to clean the
product periodically. Turn the product off, then use a soft, non-abrasive cloth. It is essential
NOT to use any solvents or harsh cleaning agents.

TROUBLE SHOOTING:

The light does not come on:
A) Make sure the wall switch and circuit breaker are on
B) Check the connections for the adapter, connectors
and power plug to ensure they are properly connected
EYES:
• DO NOT look directly at the LED lights.
• DO NOT remove the LED lights protective covering.

WARRANTY:

This product has a two-year limited warranty from the date of purchase. This
guarantees against failure due to factory defects, whether caused by materials
or workmanship. The warranty is non-transferable and only pertains to the
original purchaser. Proof of purchase is required for any repair or replacement,
so please keep your proof of purchase receipt. This warranty does not cover
normal wear and tear or damage due to misuse. Misuse of this product
includes but is not limited to:
• Using outdoors in extreme weather conditions.
• Opening the product's housing.
• Any attempts to update, remodel or fix the unit yourself.
If you have questions or are missing parts, please contact customer service at 1-888-745-4837
USER MANUAL CL-TP18RGB-EXT | 18' RGB LED TAPE LIGHT EXTENSION
AA
BB
(AA): (1) 18' Tape Light
(BB): (1) Inline Connector
(CC): (16) Rubber Mounting Clip
(DD): (32) Screws
If you have questions or are missing parts, please contact customer service at 1-888-745-4837
LINKABLE
UP TO 54'
FOR USE WITH CL-TP18RGB
CC
DD