rpm power CYCLE TRAINER Setup Manual

CYCLE TRAINER
SET UP &
SAFETY GUIDE
Important: Please read instructions before use
Wichtig: Bitte lesen Sie vor der Verwendung die Anweisungen
Important : Veuillez lire les instructions avant utilisation.
Importante: Por favor lea las instrucciones antes de usar el producto.
Importante: Leggere le istruzioni prima dell'uso
SAFETY WARNING
Before using this product, please read and understand this owner's manual in its entirety.
Adhering to all guidelines and advice laid out in this manual will ensure that you'll enjoy
the best results from your new RPM Power® Cycle Trainer.
This is a powerful exercise device and should always be treated as such. Before commencing
any exercise program or individual workout, be aware of your own existing fitness threshold
and avoid exceeding that level. It is important to pace yourself with any strength training
program and only exercise with a weight level that matches your current fitness level and ability.
If in any doubt about your current fitness ability, it is recommended that you consult your doctor
or medical physician to ensure you are sufficiently fit for strenuous physical activity, such as that
which comes from using this product.
IMPORTANT: Should you feel sick, dizzy or incur any sort of pain or discomfort while using this
exercise device, STOP exercising immediately and seek medical advice if necessary.
GENERAL USAGE GUIDELINES
1. Always make sure the Cycle Trainer is used on a level surface that is free from objects and
furniture.
2. This product is designed for adult use only. Do not allow children to use or go near this
device when in use, as they could hurt themselves on the spinning elements.
3. Take care not to touch the spinning rollers or wheels when in use.
4. Always inspect this product before use. Do not use this product if you notice any elements
are missing or damaged.
5. Make sure all bolts and screws are securely tightened before use.
6. I t is important to check the couplings which support the rear hub for damage or cracks
before use.
7. Never brake suddenly while using the Cycle Trainer. This can cause unnecessary wear and
tear to the bicycle tyre and/or the trainer.
8. Do not use this product for any purpose other than which it was intended.
For best use, we recommend using a smooth or universal thread tyre.
Please ensure that the bicycle tyre is fully inflated before using it with this Cycle Trainer.
Max. user weight : 150kg (including bicycle)
PRODUCT INSTALLATION:
1. Unfold the frame and place it on a level floor.
2. Attach the magnetic wheel to the bottom of the frame and tighten the bolts to secure it.
3. Before placing the
bike on the Cycle
Trainer, rotate the
adjustable handle (D)
on both sides.
4. Place the bicycle on
the Trainer and adjust
the handle (D) so it is
securely attached to
the hub, then lock it
into place by rotating
the lock nuts (part C).
Tighten the nuts
securely, but do not
overtighten them.