Wiring Diagram - Johnson MISTRAL Series Instruction Manual

MISTRALCP SCREEN THERMOSTAT
l. Product Summary:
MISTRALCP.Thermostats are designed to control the fans and valves in
air conditioner applications via comparison of the room temperature and
setting temperature as reaching the aim of comfort and saving energy.
11. Technical Parameter:
Power Supply
Curren! Load
Power Consumption
Externa! Material
Sensino Element
Set Temp. Range
Accuracy
Dimension
Ambient Temo.
Storage Temp.
lnstallation Box
111. Main Functions and Characteristics
1. Modern design similar as a cell phone.
2.Large glass screen display with back-light, white words show.
3.2-pipe and 4-pipe for choose.
4.3 Fan speed + auto timer switch for daily or week.
5.With daily programmable function, 4 period settings.
6.Selectable 80mmx80mm hidden box.
7. Precise comfort control keeps temperature within 1 ºC of the level you set.
IV. User Interface Explanation
Low Mid
Mode
V. Model Definition
2: Two pipe, for air conditioning AC
4: Four pipe, for air conditioning
For example: MISTRALCP.
VI.Model Spec
Spec
Model Fan Speed
MISTRALCP
4 Pipe 3 Fan speed+Auto
AC85-260V, 50/60HZ
3A
<0.5W
PC+ABS (flame retardan!)
NTC
10'( - 40'(
º
±1 C
86x86x13.3mm
0-45'( 5-95%RH/Non-condensino)
º
-5-55 C
80x80mm
High Auto
Period 1
Period 2
Period4
Period3
Valve
Set Temp.
Fan Up Down
Daily Timer
Clock set
Programmable
✓
✓
VII.Wiring Diagram
AC230V 50/60HZ
Low
L N Hi
Val1
1
Mid
1No Ncl
1 2 3 4
Two Pipe
VIII. Operation lnstruction
1. Setting Power on/off
Press(!) to turn on/off the power.
2. Setting Temperature
Press AV ·lo set the temperature.
Factory default is 26 ·c.
*
3. Setting the System Mode
Press � to select heating, *,cooling or-w ventilation.
Factory Default is ventilation.
4. Setting the Fan Speed
Press it to select the fan speed.
� is Low speed(Factory default);
� is Mid speed;
®
is High speed;
O
is Auto speed.
In auto mode, the fan will run according to the comparison of room
temperature and set temperature.
5. Setting the Real Time.
Press and hold � for 3 sec., hh will flash in the position of hh: mm.
Press AV· to adjust the curren! hour.
Press 0, mm will flash in the pos ilion of hh: mm.
Press AV· to adjust the curren! minute.
Press � , 1 will flash in the position of week: 1234567.
Press AV· to adjust the curren! week.
6. Setting the Regular Boot
Press� .J_ or more than 3 seconds, after setting the time, continue to press
� until L.Jt and "hh" twinkling. Press AV to adjust the hours.
After the adjustment of hours, press � until the "mm" twinkling, press
AV to adjust the minutes.
After the completion of all adjustments , press
does not twinkle, Regular boot setup is complete.
The operation of canceling Regular boot is the same, press � to the
state of Regular boot, then pressing a,., the O. is twinkling, Regular boot
has been canceled.
7. Setting the OffTimer
After the setting of Regular boot, press� again, until � and "hh" twinkling,
press AV to adjust the hours.
After the adjustment of hours is completed, press� until the"mm"twinkling,
press AV to adjust the minutes.
After the completion of all adjustment, press a,. to confirm, then � does
not twinkling, Off timer setup is completed.
The operation of cancelin� Off timer is the same, press � to the state of
Off timer, then pressing
The setting of the third period and forth period are same with the first and
second period, the icons are 61r+ 0.(on, off/into the house, out of the house)
3
AC230V 50/60HZ
L N
Four Pipe
t-
to confirm, then O.
t- ,
the ID is twinkling, Off timer has been canceled.
V.1