Sony KLV-32V530A Service Manual page 5

b) Detachment
(1) Hold between the lock part and harness of socket.
Release the lock and pull out connector within 20
degree.
(2) Prohibited matter (Refer Figure D & E explanation)
Figure D
Figure E
Figure D: Do not pull out by holding the harness only.
Figure E: Do not pull out the connector when it does not
release the lock.
KLV-32, 40 V530A, 32, 40, 46, 52 V550A
c) Confirmation of Lock Condition
(1) Confirm the lock conditions. When lock is completed,
base and socket must be same line as shown in Figure
F and G.
(2) NG Condition
It is NG condition when there are some gap between
base and socket such as in Figure H and I.
Gap
– 5 –
Figure F
Figure G
Figure H
Figure I
RM-GA015
Gap