Table of Contents
Advertisement
Installation of appliance
5
A
WARNING: Before starting the
installation, read the safety
information on user manual.
WARNING: Failure to install
B
with screws and stabilizers
in accordance with these ins-
tructions may result in elect-
ric shock.
For the installation of the hood, please
contact the nearest Authorized Service.
It is the customer's responsibility to pre-
pare the location and electrical installati-
on of the hood.
5.1 Position of the appliance
• Distance between the cooker and the
cooker hood must be considered prior
to assembly. This distance should be
65 cm.
• Distance must be measured from the
surface of grate for gas cookers,
• from surface of glass for electric coo-
kers.
Cooker Hood / User Manual
If you have an outlet to the outside, your
cooker hood can be connected as below
picture by means of an extraction duct
(enamel, aluminum, flexible pipe or non-
flammable material with an interior dia-
meter of 120mm)
5.2 Method A
1. To install onto the wall, drill 4 holes of
Ø 8mm on a suitable place according
with the centre distance of hole in the
back of the cooker hood. See Pic. 1.
2. Insert the nut into the holes.
3. Insert the screws into the nuts and
tight.
4. Put up the cooker hood onto the fixed
screws.
5. Then use the attached accessories
enclosed to turn the screws into the
two holes of inside the hood, and then
fix the screws to tighten the hood onto
the wall.
6. Put the outlet onto the cooker hood
15 / EN
Advertisement
Table of Contents
