Cleaning The Air Filter And Air Filter Box; Preparing Air Filter Box Cover For Securing - KTM 300 EXC Owner's Manual

12.24

Cleaning the air filter and air filter box

Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Info
Do not clean the air filter with fuel or petroleum since these substances attack the foam.
12.25

Preparing air filter box cover for securing

Preparatory work
–
Remove the seat. (
–
Remove the air filter box cover. (
–
Remove the air filter.
Main work
–
Wash the air filter thoroughly in special cleaning liquid and
allow it to dry properly.
Air filter cleaner (
Info
Only press the air filter to dry it, never wring it out.
–
Oil the dry air filter with a high-grade air filter oil.
102191-01
Oil for foam air filter (
–
Clean the air filter box.
–
Clean the intake flange and check it for damage and tightness.
Finishing work
–
Install the air filter.
–
Install the air filter box cover. (
–
Mount the seat. (
Preparatory work
–
Remove the seat. (
–
Remove the air filter box cover. (
Main work
–
Drill a hole at marking
Guideline
Diameter
S03499-10
Finishing work
–
Install the air filter box cover. (
–
Mount the seat. (
SERVICE WORK ON THE CHASSIS 12
p. 66)
p. 67)
( p. 68)
p. 146)
p. 146)
( p. 68)
p. 67)
p. 66)
p. 66)
p. 67)
A
.
6 mm (0.24 in)
p. 67)
p. 66)
69