Section 13 | How To Turn On Your Flame Sense With Spark Ignition - Outdoor Plus WILLIAMS TFL-WILL72RTF Owner's Manual

HOW TO TURN ON YOUR FLAME SENSE WITH SPARK IGNITION
THIS SECTIONS EXPLAINS HOW TO TURN ON YOUR FLAME SENSE WITH SPARK IGNITION
STEP 1A
PUT ON THE BATTERY
UNDO THE BATTERY KNOB
» We Include a Battery with your unit, we install it backwards
so your Fire Units does not ignite during transit.
STEP 1D
PUT ON THE BATTERY
TEST YOUR SPARK
» Make sure your Spark Ignition is working before
turning on the GAS.
STEP 2C
TURNING ON
LET SPARKS FLY
» Sparks will occur near the pilot.
» A BLUE/RED/ORANGE flame will appear.
» Once the Thermocouple is HOT. The Pilot light
will remian lit with out you having to press or hold
anything.
26
PUT ON THE BATTERY
FLIP THE BATTERY TO ITS CORRECT POSITION
» Turn the Battery to the Positive Charge is Facing Out.
PRESS THE GAS VALVE (IN)
» Place the Knob in the [Pilot Light] position and
press in for 30-60sec. This will allow gas to go up up
to the pilot.
» To turn on your Fireplace. Turn the Knob to the
LEFT and this will allow gas to flow more opening.
THEOUTDOORPLUS.COM | +1 (909) 460-5579 | SUPPORT@THEOUTDOORPLUS.COM THEOUTDOORPLUS.COM | +1 (909) 460-5579 | SUPPORT@THEOUTDOORPLUS.COM
STEP 1B
STEP 2A
TURNING ON
STEP 2D
TURNING ON
TURN ON THE SYSTEM
STEP 1C
PUT ON THE BATTERY
UNDO THE BATTERY KNOB
» Reinstall the battery and press the button, you should hear
a "click, click, click" sound.
» If you do not hear a click sound you might have a dead
battery.
STEP 2B
TURNING ON
LOCATION OF THE GAS
» You are still holding the Knob In.
» After 30-60sec press the Spark Ignitor.
STEP 2E
TURNING ON
YOUR FIRE PLACE IS ON
» Adjust your Flame Height to your desire height.
» Make sure you read our Safety Guidelines.
» Enjoy Your Fireplace.
27