Subscribe to Our Youtube Channel
Related Manuals for Uplift Desk LTG006
Summary of Contents for Uplift Desk LTG006
- Page 1 Sliding Flex Lamp LTG006 For assembly assistance, visit upliftdesk.com/contact, or call 800-349-3839, or email info@upliftdesk.com ©2023 UPLIFT Desk®. All Rights Reserved...
- Page 2 Safety and Warnings CAUTION: Read all instructions before assembly. Failure to assemble or operate properly may result in damage or personal injury. CAUTION: If using Lamp on an adjustable height work surface, raise to maximum height before attaching Lamp to ensure that the power cord will reach the outlet when the worksurface is raised. CAUTION: Route the power cord so it won’t be stepped on, get pinched, or have items placed on it.
- Page 3 A. Using the 4mm Allen wrench, remove the two screws holding the lower clamp bracket assembly to the back plate of the clamp. © UPLIFT Desk • 800-349-3839 • info@upliftdesk.com • upliftdesk.com...
- Page 4 B. For thinner desks (minimum 3/4’’), reassemble the lower clamp bracket assembly in the upper threaded holes as shown. Round clamping plate C. For thicker desks (maximum 3 1/2”), after removing the lower clamp bracket assembly, use a Phillips Head screwdriver to remove the round clamping plate from the threaded stem and knob.
- Page 5 B. Tighten the knob until the clamp is securely fastened to the edge of your desk. © UPLIFT Desk • 800-349-3839 • info@upliftdesk.com • upliftdesk.com...
- Page 6 Step 4 - Power Cord Connection A. Plug the barrel end of the Power Adapter cord into the end of the cord coming from the lamp. B. Plug the Power Adapter into a 120V power outlet. If you are attaching the lamp to a height adjustable desk or table, make sure there is enough slack in the power cord to reach the lamp when the desk or table is raised.
- Page 7 Head to change the brightness of the Sliding Flex Lamp. When turned off, the lamp remembers the brightness setting for the next session. Brightness levels: 100% 90% 80% 60% 40% 20% © UPLIFT Desk • 800-349-3839 • info@upliftdesk.com • upliftdesk.com...
- Page 8 Copyright Notice: This guide is a component of this UPLIFT Desk product. This guide is a part of © the scope of delivery, even if the item is resold. This guide is also available on the UPLIFT Desk website: upliftdesk.com. These specifications are subject to United States copyright law.
Need help?
Do you have a question about the LTG006 and is the answer not in the manual?
Questions and answers