Table of Contents
Advertisement
HD SEEK function
Using the HD Seek Up / Down button, the radio will seek to the next available HD Radio station. This function will
also scan to the Multicast program if available.
Press and release the HD Seek Up / Down button will tune to the next available HD Radio station of sufficient signal
strength.
Emergency alert (EA)
Emergency Alerts (EA) is a warning system used by broadcasters to notify listeners about potential hazardous
situations related to extreme weather, floods, infrastructure failures, amber alerts (child abductions), and more.
Your Radio must be in a location that allows for adequate reception of audio and data services and tuned to a station
that provides the Emergency Alerts.
When enabled, the Emergency Alerts feature allows audio and text-based alerts to be played or displayed by the
radio, the alerts can also awaken the radio from standby mode when using the AC adaptor.
Emergency alerts setting
1
Press and hold the Menu button to enter the menu setting and then rotate the Tuning control knob until "Alert" is
shown on the display. Press the Tuning control knob to enter the setting.
2
Rotate the Tuning control knob to select "On" or "Off". To disable the
Emergency Alerts feature, Select "Off" and then press the Tuning control
knob to confirm the setting. With "On" selected, press the Tuning control
knob to enter the Emergency Alerts Location setting.
3
Rotate the Tuning control knob to select your required location setting.
If you choose "Off": all the alerts that are broadcast within the radio's
range will be received. The default setting is "Off". Press the Tuning control
knob to confirm the setting.
If you choose "On": you can define the location, then the receiver will
display text alerts (or awaken the radio from standby mode) only when
the received data included location-matching alerts. If location data is not
included in the received data, then the receiver disregards the locations
that are defined in the receiver. Press the Tuning control knob to confirm
the setting.
4
The location preset "1" (for example) will flash on the top right corner of the
screen. Now choose your required location preset you would like to setup.
Rotate the Tuning control knob to select your required location preset and
press the Tuning control knob to confirm your selection. Up to 10 locations
can be saved.
GB
E
07
Advertisement
Table of Contents
