Table of Contents
Advertisement
When installing the reserve, always place the bridle in the reserve compartment first and then the inner container.
The connection to the reserve handle must be without twists.
If a reserve parachute does not fit in the inner container after repacking, it must be
Warning
refolded to the shape of the inner container.
Warning
Put the bridle in first, then the reserve.
Warning
Never attach the inner container to the reserve parachute!
5.2.5. Closing the reserve compartment
The outer container flaps are closed by white closure loops and yellow cables. The design of the outer container
creates the necessary tension and pressure on the closure loops and cables.
Attach rescue handle
Thread a packing line through the white closure loops on each side and then trough the eyelets. Lower flap first.
Secure the loops with the rescue handle yellow cable. Finish by stowing both ends of the yellow cable in their
button holes. Carefully remove the packing line to avoid possible damage due to friction.
13 / 21
Advertisement
Table of Contents
