Advertisement
RD-8C and RW-8C
Wiring to NE Products
In the Protea NE software window, the RD-8C will appear in an
expaned menu tree along with its host unit in the left side listing of the
screen. An offline or disconnected host unit will appear in red text while
an online unit appears in green. Individual NE products and their re-
mote control units can be dragged onto the project canvas to simulate
physical rack and room installation groups, but editing each product can
be done from either the product list or the canvas. Once an image has
been placed on the canvas, it must be deleted by hand if that device is no
longer available to the software. Scanning for devices does not auto-
matically remove images or list items which may have been installed at
one time but are now off line.
The project canvas is used to visually represent and control a fixed
physical sound system installation, and can display all Ashly NE proces-
sors, amplifiers, and remotes used in that system. Lines, rectangles, text,
and image files can be added to create a custom virtual control screen
along with the NE products and individual control objects. To see all
available canvas tools, right click anywhere over open canvas. Check-
ing <Design Mode> allows placed objects to be moved around, while
unchecking <Design Mode> locks objects in place.
RD-8C XLR Connector
Gnd
NE Product
Data Connectors
RW-8C Euroblock Connector
NC
ne24.24M
In Out G +18
ne8800/4800/4400
Remote Data
NE Multichannel Amp
(note connector polarity)
NC
Advertisement
