Riding Instructions; Operation; Display; Key Functions - PURE Air Pro LR Manual

4

Riding instructions

4.1

Operation

First, turn on your e-scooter by pressing the power
button and hold for 2 seconds.
The e-scooter comes with an integrated safety start
function where the throttle only activates once the
e-scooter is already in a rolling motion (5 km/h).
To start riding, place one foot on the footrest while
pushing against the floor with your other foot.
Throttle
Move the throttle on the right side of the handlebar
to start accelerating. You can also accelerate the
e-scooter like a conventional push scooter by simply
pushing against the floor with your foot.
You can slow down the e-scooter by pulling the
brake lever on the left side of the handlebar.
Braking will activate both the electrical rear brake
and the front drum brake.
Shift your body weight slightly backwards to
counterbalance the braking effect and ensure safe
and controlled braking.
Pure Air Pro LR
22
4.2

Display

You'll find the following information on the
handlebar display.
mph
km/h

Key functions

4.3
On the display of your e-scooter, you will find one button:
To start the e-scooter, press and hold the power button for 2
seconds. Press and hold the power button again for 2 seconds
to turn the e-scooter off.
To turn off the lights, press the power button once. Press the
power button again to turn the lights back on. Lights are
turned on as default.
To change speed modes, double press the power button. The
e-scooter has 3 speed modes as outlined below:
Pedestrian mode (6km/h): (no icon)
Medium: blue 'S'
Fast: red 'S'
Light indicator
Speed Mode
Indicator
Bluetooth
Current speed
Battery power
(5 bars = full charge)
Power button
Service indicator
23