ECO-WORTHY ECO-1500W User Manual page 7

Mark ① to connect the positive pole of the battery through the breaker (100A
fuse is recommended)
Mark ② to directly connect with the negative pole of the battery
Note:The battery voltage range of this hybrid inverter is below 30V
DC, please make sure that the lead-acid battery or lithium battery
bank voltage is lower than this threshold.
Do not short-circuit the battery wiring. Short-circuiting the battery may
cause arc damage.
All wiring must be proceeded by professionals.
The use of suitable cables is very important for the safe and efficient
operation of whole system, in order to reduce risks, please use the
cable sizes recommended in this note
Inverter Typical
Module Current
ECO-1500W
70A
(S)
Wire
Gauge
You can derate cable size according to the
10AWG
actual use, but it is still recommended not
to use excessive cables.
-5-
Note