4.2Unpacking And Inspection
♦ Before installation, please inspect the unit. Be sure that nothing inside the
package is damaged
4.3 Mounting the Unit
Use the mounting holes on its back for fixing. The interface wiring should be
correct as diagram.
Consider the following when choosing an installation location:
♦ Do not install the inverter on flammable materials.
♦ Install on solid wall.
♦ Please install the inverter at sight level to read the display easily.
♦ The ambient temperature should be between 0 and 40°C.
♦ Be sure to keep other objects and surfaces as shown in the diagram to guar-
antee sufficient heat dissipation and to have enough space for removing wires.
It's suitable to install it on concrete or other non-combustible surfaces
4.4 Battery Connection
Please wire correctly according to the wiring diagram, from the inverter to the
breaker, and then from the breaker to the battery, pay attention to the positive
and negative poles, do not short circuit!
-4-