Control Panel - Supra BLIZ'R 3500 Manual

English
Portable air conditioning
BLIZ'R 3500
DESCRIPTION
- A Handle
- B Control panel
- C Air inlet (left)
- D Air guide bar
- E Wheels
- F Remote controller
- G Air inlet (right)
- H Air outlet
- I Outfall
- J Inlet grille
- K Exhaust pipe assembly
- L Window seal plate assembly
- M Power cord
REMOTE CONTROL (BATTERIES NOT
INCLUDED)
- 1 Power button
- 2 Swing button
- 3 Wind speed selection button
- 4 Temperature /Time up and down adjustment
- button
- 5 Mode selection button*
- 6 Timing function button
- 7 Fahrenheit and Celsius conversion button
(*) Heat mode only available on AC351RVKT

CONTROL PANEL

- (a) Power button
- (b) Wind speed selection button
- (c) Temperature and Time adjustment /
Farenheit→Celsius conversion
- (d) Mode selection button
- (e) Timing function button
- (f) Temperature /Timer display window
- (g) Remote control receiver window
- (h) Fahrenheit and Celsius conversion indicator
- (i) Swing mode
- (j) Mode indicators
USE AND CARE:
- Before each use, completely unplug the power
cable from the power supply.
- Do not use the appliance if its start / stop device
does not work. Do not remove the legs from the
appliance. Do not move the appliance while it
is in use.
- Use the handles to take or transport the appli-
ance.
- Do not turn the appliance over while it is in use
or connected to the mains.
- Unplug the power supply from the mains when
not in use and before performing any cleaning
operations.
- Keep this appliance out of the reach of children
and / or persons with reduced physical, sensory
or mental abilities or who are unfamiliar with its
use.
- Do not expose the appliance to extreme tem-
peratures. Keep the device in a dry, dustfree
place protected from direct sunlight. Never
leave the appliance unattended. It will also save
energy and prolong the life of the device.
- Any improper use, or in disagreement with the
instructions for use, can be dangerous, voiding
the manufacturer's warranty and liability.
INSTALLATION
- Be sure to remove all packaging material from
inside the appliance.
- Respect the legal provisions concerning safety
distances from other elements such as pipes,
electrical connections, etc.
- Ensure that the appliance is level with respect
to the floor.
- The appliance requires suitable ventilation in
order to work properly. Leave a space of 50cm
between walls or other obstacles. (Fig 1)
- Do not cover or obstruct any of the openings of
the appliance.
- Do not cover or obstruct the sides of the
appliance, and leave a minimum space of 50cm
front other walls, ceiling..
- The plug must be easily accessible so it can be
disconnected in an emergency.
- To achieve the highest efficiency from the
appliance it should be situated in a place where
the atmospheric temperature is between 12 and
32ºC.
- Ensure that the extraction pipe remains in a
horizontal position. (Fig 2)
- Do not add new sections to the extraction tube
provided, as it could cause the appliance to
malfunction.
- The appliance should be used with its base feet