Advertisement
Quick Links
Multi-gang frames
2gang / 3gang / 4gang / 5gang
Hager Muse / Hager Inspire
Safety instructions
Electrical equipment must only be installed and assembled by a qualified
electrician in accordance with the relevant installation standards, regulations,
directives and safety and accident prevention directives of the country.
Failure to comply with these installation instructions may result in damage to
the device, fire or other hazards.
Function
Multiple frames for 2gang to 5gang combinations of flush-mounted devices. Different
versions for horizontal and vertical installation.
Hager Muse: The frames are compatible with most flush-mounted devices of the
design with centre plates (Width x Height) = 65 x 52 mm.
In case of centre plates 52 x 52 mm, the accomodation ring must be used.
Not compatible with centre plates 52 x 65 mm.
Correct use
- For flush-mounted installation with standard connectable wall boxes.
- Only suitable for use in indoor areas with no drip and no spray water.
Technical data
Hager Muse:
Dimensions (Width x Height)
- 2gang horizontal
- 3gang horizontal
- 4gang horizontal
- 5gang horizontal
Hager Inspire:
Dimensions (Width x Height)
- 2gang horizontal
- 3gang horizontal
- 4gang horizontal
- 5gang horizontal
- 2gang vertical
- 3gang vertical
Installation manual
172 x 86 mm
258 x 86 mm
344 x 86 mm
430 x 86 mm
172 x 86 mm
258 x 86 mm
344 x 86 mm
430 x 86 mm
86 x 172 mm
86 x 258 mm
www.hager.com
Advertisement
Related Manuals for hager Muse
Summary of Contents for hager Muse
- Page 1 Multiple frames for 2gang to 5gang combinations of flush-mounted devices. Different versions for horizontal and vertical installation. Hager Muse: The frames are compatible with most flush-mounted devices of the design with centre plates (Width x Height) = 65 x 52 mm.
- Page 2 Preparing the devices for installation „ Remove frame at every single device to be combined (see installation manual of the respective device). Hager Inspire: „ Furthermore, remove cover plate at every single device (see installation manual of the respective device).
- Page 3 Align one bridge per connection and clip the bridges one after the other in the supporting plates of the devices (2). Assembling the covers (for example with “3gang frame (horizontal)”) Hager Muse Accomodation ring Multi-gang frame Rockers Hager Muse (3A): „ In case of switches, fix the rockers onto each device.
- Page 4 „ Then snap the multi-gang frame onto the device combination. Hager Inspire Cover plate Multi-gang frame Rockers Hager Inspire (3B): „ Fix the rockers and cover plates onto each device. „ Then snap the multi-gang frame onto the device combination.