0
4
P
1
PL-50R
L
2
2
3
H
PL-50R
Manual
OPERATING INSTRUCTIONS
HAND TOOL FOR BLIND RIVETS UP TO 0 5.0 MM
PL-50R
TECHNICAL INFORMATION
Capacity:
Blind rivets 3.0/3.2 - 4.0 - 4.8/5.0 mm
Material:
Aluminium, steel and stainless steel
Size:
437 mm (L) x 126 mm (H) 50 mm (P) 22 mm (0)
Weight:
1.04 Kg
DESCRIPTION OF THE TOOL
1. Tool body
2. left and right lever
3. Mandrel collector
4. Nosepiece 4.8/5.0 mm
INSTRUCTIONS
The hand tool will be standard equipped with the 4.8/5.0 mm nosepiece
for blind rivets.
The other components will be stored separate within the storage
compartment within the mandrel collector.
FIRST USE:
Make sure before using the tool that the nosepiece is suitable for the
blind rivet of use. Otherwise, change to a different size.
A
CHANGE TO A DIFFERENT SIZE BLIND RIVET:
Close the levers completely. Now use a wrench to unscrew the
nosepiece. Take the nosepiece of choice out of the storage
compartment within the mandrel collector, and replace the nosepiece
by screwing in on.
B
HOW TO SET A BLIND RIVET:
Open up the levers completely. Insert the nosepiece of the blind rivet,
and insert the blind rivet into the profile of choice. Now close the levers
completely. If necessary, repeat the above until the mandrel breaks, and
the rivet is completely set.
Read the manua
l
1
04L40103
2
04L21111
3
04Z20179
4
04L60608
5
9
13
04Z40102
04L21101
04L40104
6
10
14
04L21254
04Z20103
04L40105
7
11
15
04L21170
04Z20094
04L20524
8
12
16
04L20499
04L20498
04F60497
17
04L20500
18
04L21107
19
04L20525
20
04Z20104
PL-50R
Manual