Westinghouse Roku TV WR65UT4009 User Manual page 138

®
HDMI ARC is disabled by default. To enable HDMI
navigate to Settings > System > Control other devices (CEC), and then highlight
HDMI ARC. Press OK to enable or disable the feature.
Enabling HDMI ARC also enables System audio control. After enabling HDMI
Note:
ARC, you can disable System audio control if you prefer.
Enable system audio control
System audio control enables the TV remote to change the volume and mute state of
an amplifier or sound bar connected through HDMI
The TV automatically turns off its internal speakers and sends volume and mute
control signals to an external amplifier when all of the following are true:
•
System audio control is enabled on the TV.
•
The TV is connected to a CEC-compatible amplifier, it is powered on, and CEC
discoverability is enabled.
•
The CEC-
HDMI ARC connector with a suitable HDMI
When the CEC-compatible amplifier is off, the TV automatically turns on its speakers
(unless you have turned them off as described in
resumes local control of volume and mute state.
To enable or disable system audio control, in the Home screen menu, navigate to
Settings > System > Control other devices (CEC) and highlight System audio
control. Press OK to enable or disable the feature.
Enable 1-touch play
1-touch play enables a device to control which TV input is active. For example,
pressing Play on your Blu-ray player switches the TV to the Blu-ray input.
1-touch play is disabled by default. To enable 1-touch play, in the Home screen menu,
navigate to Settings > System > Control other devices (CEC) and highlight 1-touch
play. Press OK to enable or disable the feature.
®
ARC, in the Home screen menu,
®
, and to display the external
-screen display.
®
HDMI
®
cable.
Turning off the
132
speakers) and