Table of Contents
Advertisement
Problem II: Spinners will not throw material far enough.
Recommended Investigation:
A) Verify proper spinner speed.
B) Check hydraulic pressure relief. (See Problem I – Investigation D)
C) Check that spinner blade bolts are tight and properly in place.
D) Check that the spinner discs are securely fastened.
Problem III: Improper spread pattern.
Recommended Investigation:
A) Check setting of material divider.
B) Check spinner disc and blades for wear.
a. Replace as needed.
C) Check spinner speed.
NOTE:
If problems still persist or you have additional issues please contact your local dealer
or Chandler Equipment Service Department at 1-800-243-3319
9 - 5
Advertisement
Table of Contents
