Wow COOLIUS 2700 BT Operator's Manual page 9

WOW! Coolius 2700BT
9. New Oil 2 / UV dye Injection vessel - A large capacity vessel of 240ml is mounted on the right side of the
unit to electronically inject the oil or UV dye in to the A/C system.
10. Recovered Oil Drain Ball Valve - The Coolius 2700-BT incorporates an internal oil vessel which measures
and retains oil (if any) that is removed from A/C system during the recovery process. The operator is prompted
when the valve should be open to drain the internal vessel, when full.
11. Suction and Discharge Ports with pre-filters - This ports are used to connect to the vehicle A/C system via
service hoses.
12. Service Hoses Storage Ports - These ports are used to store the suction and discharge service hoses quick
couplers to avoid contaminations and damage.
13. ON/OFF Switch - This switch is used to switch the machine on and off.
14. Power Inlet Socket- This socket is used to connect the machine to the power supply via the power lead.
15. Front Cover- The cover id to protect the internal components of the machine.
16. Lower Cover- The lower cover houses the lower internal components of the machine.
17. Upper Cover- The upper cover houses the upper components of the machine, furthermore it incorporates
a tool tray, conveniently located on the front section of the machine.
18. Cylinder Cover- This cover is used to protect the cylinder.
19. Rear Handle - This added handle is used to enhance the monuvrability of the machine.
20. Caster Wheels - Heavy duty oil resistant caster wheels are used to manoeuvre the machine in the
workshop easily.
21. Rear wheels - two rears large 200 mm oil resistant wheel are used to make the monuvrability of the
machine easy on rough floor surfaces.
- 9 -