Before installing the SG10208, verify that the package contains the following: 1. (1) SG10208 9-Port Switch. 2. (1) AC-DC Power Adapter. 3. This User’s Manual. Please notify VERSITRON immediately if any of the aforementioned items are missing or damaged. 3. LED Descriptions Description...
1. Install a fiber optic SFP module into one or all of the SFP Slots. 2. Connect the fiber optic cable from the SFP module on the SG10208 to the fiber network. NOTE: Confirm that the fibers are connected Transmitter to Receiver.
Page 5
0 to 70° C Rx: 1310nm Tx: 1310nm GB80SFA 1000 80km -2 ~ +3 < -26 0 to 70° C Rx: 1550nm Tx: 1550nm GB80SFB 1000 80km -2 ~ +3 < -26 0 to 70° C Rx: 1310nm www.versitron.com SG10208...