Page 2
Getting Started The Silica Slayer™ by FlowZone® provides a rugged backpack reservoir with a lithium-ion powered pump to deliver water to cut saws, core drills, etc. to knock down silica dust and effectively protect the user’s lungs. In addition to being a water source for silica disruption, the Silica Slayer™ can seamlessly transform into a sprayer...
Page 3
What’s Inside: sprayer capabilities and specifications SPECIFICATIONS CONTENTS what is included in the box assemble the sprayer out of the box SPRAYER SET-UP how to get started using product USING THE SPRAYER how to properly clean and store sprayer CLEANING important considerations to follow WARNINGS...
Page 4
Silica Slayer proves 5x more efficient than manual pumping sprayers. It can be operated continuously for up to 2 hours and spray more than 85 gallons per battery charge at a distance of 30 feet. FlowZone FZSACR SPECIFICATIONS WARNING...
Page 5
What’s in the box: TANK CAP BACKPACK STRAPS 11. ADJUSTABLE NOZZLE 4-GALLON TANK DOUBLE FEMALE GHT HOSE 12. PIN STREAM NOZZLE INTAKE FILTER SPRAY GUN 13. 25° FAN NOZZLE TOP HOLSTER & BOLTS 18V LITHIUM-ION BATTERY HIGH PRESSURE SPRAY WAND 10.
Page 6
STEP 1: Set up your sprayer Remove the Attach holster to Attach the wand to the gun by top holster, tank and tighten pulling down on quick-connect nuts & bolts, with the collar on gun and inserting wand. and nozzles nuts &...
Page 7
STEP 2: Get started spraying To spray liquid: Fill the sprayer with liquid Determine which nozzle is Turn pump on by flipping through the intake filter right for the job & connect switch on side of unit. and securely tighten to spray wand by pulling Flipping switch to “I”...
Page 8
STEP 3: After you spray Rinse out any solution you sprayed with water and spray water through the sprayer and each nozzle for 3-5 minutes to completely rid tank of chemicals. NOTE: Many chemicals will become sticky and gum up the pump / hose / wand / nozzles if left in the sprayer.
Page 10
Leaks from gun and / or nozzle area 1. Loose / damaged / broken seal(s) 1. Inspect all seals & replace if necessary 2. Ball valve inside gun assembly is 2. Contact FlowZone® at +1 803-339-2500 defective for replacement part 1. Rinse sprayer thoroughly with warm,...
Page 12
Replacement Parts FZSACR Replacement Parts 1. FZRABZ - Tank Cap 2. FZRABH - Top Wand Holster 3. FZRABW - Inlet Filter 4. FZRABV - Spray Gun 5. FZRACJ - GHT/GHT Hose 6. FZRAAS - Quick-Connect Wand 7. FZRACB - Backpack Straps 8.
Page 13
FlowZone Limited Warranty WESSOL, LLC warrants (to the original purchaser) that this product will continue to function as intended if used in accordance with operating instructions (under normal consumer use) for a period of one year. If the product fails to function as intended DO NOT RETURN IT TO THE STORE, call our customer support hotline at +1 803-339-2500 or email support@silicaslayer.com.
Page 14
silicaslayer.com support@silicaslayer.com +1 803-339-2500 WESSOL, LLC 6420 Rea Road, Suite A1-104 Charlotte, NC 28277...