Download
Share
Print this page
Larson Electronics SPLT IVT-12VDC-1000VA-120VAC Series Instruction Manual
  1. Manuals
  2. Brands
  3. Larson Electronics Manuals
  4. Inverter
  5. SPLT IVT-12VDC-1000VA-120VAC Series
  6. Instruction manual

Larson Electronics SPLT IVT-12VDC-1000VA-120VAC Series Instruction Manual

Solar inverter, 12v dc input, 120v ac output, 1000 va
Hide thumbs

Advertisement

Quick Links

Download this manual
Replacement Solar Inverter, 12V DC input, 120V AC Output, 1000 VA
Thank you for your purchase of the Larson Electronics SPLT-xx-IVT-12VDC-1000VA-120VAC.
WARNING:
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CRITICAL SAFETY INSTRUCTIONS:
•
INSTALLATION SHOULD ONLY BE CONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY
RELEVANT LOCAL BUILDING CODES.
RISK OF FIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF FIXTURE'S ELECTRICAL
•
SYSTEMS. IF NOT QUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.
BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
•
•
MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE FIXTURE'S RATED VOLTAGE.
TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP
•
OBJECTS. SUITABLE FOR DAMP LOCATIONS.
IMPORTANT
READ CAREFULLY BEFORE INSTALLING THIS FIXTURE. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
THE
WITH
NATIONAL ELECTRICAL CODE AND ALL APPLICABLE LOCAL CODES. PROPER GROUNDING IS
REQUIRED FOR SAFETY.
WE STRONGLY ENCOURAGE ONLY A LICENSED ELECTRICIAN INSTALL, OPERATE AND MAINTAIN THIS
PRODUCT. IF YOU ARE NOT QUALIFIED OR UNFAMILIAR WITH ANY ASPECT OF THIS INSTRUCTION SHEET,
CONSULT AN ELECTRICIAN. THERE ARE NO SERVICEABLE PARTS INSIDE.
WARNING: MAKE SURE POWER IS TURNED OFF BEFORE STARTING THE
INSTALLATION OR PERFORMING ANY MAINTENANCE.
RISK OF FIRE/ELECTRIC SHOCK –
RISK OF PERSONAL INJURY –
RISK OF BURN –
ALLOW FIXTURE TO COOL BEFORE SERVICING.
Replacement Solar Inverter, 12V DC input, 120V AC Output, 1000 VA
Larson Electronics, LLC
Instruction Manual
SPLT-xx-IVT-12VDC-1000VA-120VAC
DISCONNECT POWER AT BREAKER BEFORE INSTALLING OR SERVICING.
FIXTURE MAY BECOME UNSTABLE OR DAMAGED IF NOT INSTALLED PROPERLY.
Phone: (800) 369-6671
SPLT-xx-IVT-12VDC-1000VA-120VAC
MUST
Fax: (903) 498-3364
BE
WIRED
IN
www.larsonelectronics.com
ACCORDANCE
1 of 11

Advertisement

loading

Related Manuals for Larson Electronics SPLT IVT-12VDC-1000VA-120VAC Series

Summary of Contents for Larson Electronics SPLT IVT-12VDC-1000VA-120VAC Series

  • Page 1 SPLT-xx-IVT-12VDC-1000VA-120VAC Replacement Solar Inverter, 12V DC input, 120V AC Output, 1000 VA Instruction Manual Thank you for your purchase of the Larson Electronics SPLT-xx-IVT-12VDC-1000VA-120VAC. WARNING: READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. CRITICAL SAFETY INSTRUCTIONS: •...
  • Page 2 On exposure to skin, flush with water immediately. If eye exposure occurs, flush with water for 15 minutes and consult a physician immediately. 2 of 11 Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com...
  • Page 3 For frequent use in dusty environment, we recommend that you replace air filter element at least once a month. 4. Regularly clean dust and dirt from compressor cooling fins and motor housing. 3 of 11 Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com...
  • Page 4 Another person may need to hold down the larger mast section collars to assure the proper sequence of extension. Close the air control valve as soon as the mast section is up. 4 of 11 Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364...
  • Page 5 Check the brake lights, make sure all brake lights work properly on the trailer before transport. If light does not turn on, check all wire connections to the light make sure all connections are good. If light still not turn on, change light bulb. 5 of 11 Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com...
  • Page 6 Ring and Pintle – Follow the same steps as you would for the Coupler and Hitch Ball. • Wheel Bearings – Check for loose, worn, or damaged wheel bearings. Lubricate the bearings as • needed. 6 of 11 Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com...
  • Page 7 Wheel Rims – Inspect for cracks and dents and replace as needed. • Axle Attachment Bolts – See your dealer for inspection. • Brake Wiring – Check for bare spots, fraying, etc. and replace as needed. • 7 of 11 Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com...

  • Page 8: Troubleshooting Manual

    A. Inverter Output B. Light head plug C. Light head junction box. If the inverter fails check for blown fuse on the inverter and replace with equivalent fuse rating. 8 of 11 Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com...
  • Page 9 1. Make sure compressor in OFF position switch is ON 2. Blown fuse 2. Disconnect compressor 3. Motor overheats from power source, replace fuse. (Refer to Specifications 9 of 11 Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com...
  • Page 10 2. Worn bearing on eccentric 2. Replace bearing or piston assembly motor shaft 3. Replace piston or 3. Cylinder or piston ring is compressor worn 10 of 11 Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com...

  • Page 11: Maintenance

    Inspect for good working condition prior to storage and before re-use. REPLACEMENT PARTS The SPLT-xx-IVT-12VDC-1000VA-120VAC is designed to provide years of reliable performance. Should the need for replacement parts arise, please contact Larson Electronics. THESE INSTRUCTIONS...