Table of Contents
Advertisement
Medalist Family AT Product Manual, Rev. A
29
If the drive receives a Set Features command with a mechanism and
mode value of 0000 0001 and the drive supports disabling of IORDY,
then the drive sets its default PIO transfer mode and disables IORDY.
3.1.3 Sleep command (99
, E6
)
H
H
This command performs the same function as the Standby Immediate
command (94
, E0
).
H
H
3.2 AT Interface connector pin assignments
The signal name and signal direction for each I/O connector pin is
described in Figure 6 on page 30. See the Seagate ATA Interface
Reference Manual , publication number 36111- xxx , for a complete de-
scription of each pin.
Signal names are shown in upper-case letters. If the signal name is
followed by a minus sign (–), the signal is active low. Otherwise, the signal
is active high.
Advertisement
Table of Contents
